THIS WEB SITE CONTAINS DIAGRAMS WITH APPROPRIATE A.S. CODES, DIMENSIONS, COLOUR AND MATERIALS BREAKDOWN. INFORMATION IS BASED PRIMARILY ON A.S. 1743 SIGN STANDARDS.

FOR FURTHER TECHNICAL INFORMATION PLEASE REFER TO THE STANDARDS AUSTRALIA MANUAL A.S. 1743 - 2001 TECHNICAL SPECIFICATIONS.

PLEASE SEE COPIES OF OUR QUALITY CERTIFICATES AT THE BEGINNING OF THIS CATALOGUE AND BE ASSURED THAT JASON SIGNMAKERS MANUFACTURE, SUPPLY AND INSTALL TO STRICT QUALITY PROGRAMS & PROCEDURES.

MATERIALS:
ALUMINIUM SHEETING:
ALL ALUMINIUM SHEETING USED IN THE MANUFACTURE OF FLAT SHEET SIGNS IS EITHER 1.6mm OR 2mm 5251 / 5052 H34 - H38 ALUM .

BOTH SIDES ARE ACID ETCHED AND THE SIGN SURFACE IS PVC COATED TO PROTECT THE SURFACES DURING MANUFACTURING PROCESSES. THE ACID ETCHING SERVES TWO PURPOSES, IT PROVIDES A NON-GLARE REAR SURFACE AND ENSURES CORRECT SURFACE CONDITIONS FOR REFLECTIVE SHEETING ADHESION.

ALUMINIUM STIFFENERS (STRUTS):
THERE ARE TWO SIZES OF ALUMINIUM STIFFENING EXTRUSION, WE REFER TO THEM AS (TYPE A) AND (TYPE B).

TYPE B (HEAVY DUTY EXTRUSION) IS USUALLY ONLY USED IN THE MANUFACTURE OF VERY LARGE ADVANCE DIRECTIONAL (A.D.) SIGNS. THESE STIFFENERS ARE USUALLY POP RIVETED TO THE REAR OF THE SIGN.

LARGER SIGNS SUCH AS A.D. SIGNS CAN ALSO BE MANUFACTURED AS INTERLOCKING MODULAR SECTION SIGNS. THIS ENABLES THE SIGN TO BE TRANSPORTED IN SMALLER SECTIONS REDUCING TRANSPORT COSTS AND MAKING IT EASIER TO ERECT ON SITE REQUIRING LESS LABOUR.

COLORBOND/ZINC ANNEAL:
SIGNS IN THE TEMPORARY WARNING SECTION ARE USUALLY MADE FROM EITHER 1mm COLORBOND OR 1mm ZINC ANNEAL. THEY HAVE A SPECIAL FOLDED BOX EDGE FOR STIFFENING TOP AND BOTTOM AND TO ACCOMMODATE BI-POD STANDS ON SIDES. THEIR CONSTRUCTION IS FRANGIBLE AND COMPLY WITH MRWA STANDARDS.

COLORBOND PROVIDES A NON-GLARE REAR SURFACE TO THE SIGN. THE REAR OF COLORBOND & ZINC ANNEAL SIGNS CAN BE PAINTED IF REQUIRED.

ACCESSORIES:
JASON SIGNMAKERS MANUFACTURE BI-POD STANDS FOR THE ERECTION OF TEMPORARY WARNING SIGNS.

BI-PODS ARE MADE FROM 20mm SOLID MILD STEEL ROD FOR THE LEG AND 20mm CHS TUBE FOR THE POST. THEY ARE SOLD IN PAIRS.

REFLECTIVE SHEETING:
REFLECTIVE- JASON SIGNMAKERS EXCLUSIVELY USE 3M SCOTCHLITE REFLECTIVE SHEETING AND ARE ABLE TO OFFER OUR CLIENTS THE (MANUFACTURERS EXTENDED WARRANTY PROVISION) AS A MEMBER OF THE 3M NATIONAL SIGN MANUFACTURERS NETWORK.

THE 3M ORGANISATION ROUTINELY AUDIT OUR SPECIALISED LAMINATION MACHINERY TO ENSURE CORRECT USE OF SQUEEZE ROLLER PROCEDURES, SCREEN PRINTING TECHNIQUES, HANDLING AND STORAGE OF ALL MATERIALS AND THE CORRECT TREATMENT & PREPARATION OF SIGN SUBSTRATES.

PLEASE SEE A COPY OF THE 3M CERTIFICATE AT THE BEGINNING OF THIS CATALOGUE. BE ASSURED, WE SUPPLY THE VERY BEST PRODUCTS AVAILABLE ON THE MARKET, WITH ALL MATERIALS COMPLYING TO AUSTRALIAN STANDARDS AND MAIN ROADS WA STANDARDS.

ANTI-GRAFFITI FILM:
3M PRODUCT - P.O.F. 1150 CAN EASILY BE LAMINATED OVER THE SIGN FACE OF ANY FLAT SIGN TO PROTECT AGAINST GRAFFITI AND PROLONG THE LIFE OF YOUR SIGN. THIS FILM MUST BE LAMINATED PRIOR TO ANY STIFFENERS BEING POP RIVETED TO SIGN ETC.

FOR WARRANTY TO REMAIN VALID, WE MUST USE A 3M SANCTIONED PRODUCT FOR ANTI-GRAFFITI PURPOSES. TO THIS POINT IN TIME, THERE IS NO OTHER FILM OR SPRAY PRODUCT THAT CAN BE USED WITHOUT VOIDING WARRANTY.

OUR SALES REPRESENTATIVES ARE ALWAYS AVAILABLE SHOULD YOU REQUIRE MORE INFORMATION ON THIS PRODUCT OR ANY OTHER PRODUCT DEPICTED IN THIS CATALOGUE.

VARIATIONS:
ANY SIGN NOT LISTED AS SUPPLIED WITH STIFFENERS CAN BE SUPPLIED WITH STIFFENERS ON REQUEST. AN ADDITIONAL COST WILL APPLY.

ACCESSORIES:
A VARIETY OF BOLTS, NUTS, WASHERS AND SECURITY WASHERS IN M8 & M10 ARE AVAILABLE TO SUIT ALL SIGN/POST/BRACKET REQUIREMENTS.

ALUMINIUM SECURITY WASHERS REQUIRE SPECIALLY TURNED DOWN SOCKETS. AS A SERVICE TO OUR CLIENTS JASON SIGNMAKERS CAN ARRANGE THE SUPPLY OF THESE SOCKETS AT COST.

JASON SIGNMAKERS HIGHLY RECOMMEND THE USE OF A NYLON WASHER BETWEEN SIGN FACE AND EACH SECURITY WASHER OR BOLT HEAD.

SIGN DESIGN:
JASON SIGNMAKERS HAVE THE LATEST MODERN P.C. BASED COMPUTER EQUIPMENT AND DESIGN SOFTWARE FOR THE DESIGN AND MANUFACTURE OF OUR SIGNAGE. WE ARE ABLE TO WORK WITH OUR CLIENTS AND HELP THEM THROUGH THE CONCEPTUAL STAGE OF DESIGN, SUPPLYING FULL COLOUR DRAWINGS IN A3 OR A4 SIZE FOR APPROVAL.

ALTHOUGH THIS SERVICE IS NOT FREE, THE COST IS INEXPENSIVE.

WE ALSO HAVE WIDE FORMAT DIGITAL PRINTING FACILITIES FOR BOTH REFLECTIVE AND NON-REFLECTIVE APPLICATIONS. (1570MM PRINTING WIDTH ON SOLVENT BASED MACHINES)

ASK A SALES CONSULTANT FOR MORE INFORMATION.

THE REFERENCES FOR THE MANUFACTURE OF THE SIGNS THROUGHOUT THE CATALOGUE ARE:
AS 1742.1 GENERAL INTRODUCTION AND INDEX OF SIGNS
AS 1742.3 TRAFFIC CONTROL DEVICES FOR WORKS ON ROADS
AS 1742.4 SPEED CONTROLS
AS 1742.5 STREET NAME AND COMMUNITY FACILITY NAME SIGNS
AS 1742.7 RAILWAY CROSSINGS
AS 1742.9 BICYCLE FACILITIES
AS 1742.11 PARKING CONTROLS
AS 1743 ROAD SIGN SPECIFICATIONS
AS/NZS 1906.1 RETROREFLECTIVE MATERIALS
AS 1163 STRUCTURAL STEEL HOLLOW SECTIONS
AS 1397 STEEL SHEET & STRIP- Hot Dipped Zinc-Coated or Aluminium/Zinc-Coated
AS 1627.4 METAL FINISHING - ABRASIVE BLAST CLEANING
AS 1627.5 METAL FINISHING - PICKLING, DESCALING & OXIDE REMOVAL
AS 1627.6 METAL FINISHING - CHEMICAL CONVERSION TREATMENT OF METALS
AS 1734 ALUMINIUM & ALUMINIUM ALLOYS - FLAT SHEET, COILED SHEET AND PLATE
AS 1866 ALUMINIUM & ALUMINIUM ALLOYS - EXTR. ROD, BAR, SOLID & HOLLOW SHAPES
AS/NZS 3750.9 PAINTS FOR STEEL STRUCTURES - ORGANIC ZINC-RICH PRIMER

Back to top